SIP Router: Core Cookbook

This tutorial collects the functions and parameters exported by SIP Router core to configuration file.

Keywords specific to SIP messages which can be used mainly in 'if' expressions.

The address family of the received SIP message. It is INET if the message was received over IPv4 or INET6 if the message was received over IPv6.

Exampe of usage:

    if (af==INET6) {
        log("Message received over IPv6 link\n");
    }

The IP of the local interface where the SIP message was received. When the proxy listens on many network interfaces, makes possible to detect which was the one that received the packet.

Example of usage:

   if(dst_ip==127.0.0.1) {
      log("message received on loopback interface\n");
   };

The local port where the SIP packet was received. When SIP-Router is listening on many ports, it is useful to learn which was the one that received the SIP packet.

Example of usage:

   if(dst_port==5061)
   {
       log("message was received on port 5061\n");
   };

This script variable is a reference to the URI of 'From' header. It can be used to test 'From'- header URI value.

Example of usage:

    if(is_method("INVITE") && from_uri=~".*@sip-router.org")
    {
        log("the caller is from sip-router.org\n");
    };

The variable is a reference to the SIP method of the message.

Example of usage:

    if(method=="REGISTER")
    {
       log("this SIP request is a REGISTER message\n");
    };

The variable is a reference to the size of the message. It can be used in 'if' constructs to test message's size.

Example of usage:

    if(msg:len>2048)
    {
        sl_send_reply("413", "message too large");
        exit;
    };

.

This variable can be used to test the transport protocol of the SIP message.

Example of usage:

    if(proto==UDP)
    {
        log("SIP message received over UDP\n");
    };

If used in onreply_route, this variable is a referece to the status code of the reply. If it used in a standard route block, the variable is a reference to the status of the last reply sent out for the current request.

Example of usage:

    if(status=="200")
    {
        log("this is a 200 OK reply\n");
    };

Reference to source IP address of the SIP message.

Example of usage:

    if(src_ip==127.0.0.1)
    {
        log("the message was sent from localhost!\n");
    };

Reference to source port of the SIP message (from which port the message was sent by previous hop).

Example of usage:

    if(src_port==5061)
    {
        log("message sent from port 5061\n");
    }

This variable can be used to test the value of URI from To header.

Example of usage:

  if(to_uri=~"sip:.+@sip-router.org")
  {
      log("this is a request for sip-router.org users\n");
  };

This variable can be used to test the value of the request URI.

Example of usage:

    if(uri=~"sip:.+@sip-router.org")
    {
        log("this is a request for sip-router.org users\n");
    };

Values that can be used in 'if' expressions to check against Core Keywords

This keyword can be used to test whether the SIP packet was received over an IPv4 connection.

Example of usage:

    if (af==INET) {
        log("the SIP message was received over IPv4\n");
    }

This keyword can be used to test whether the SIP packet was received over an IPv6 connection.

Example of usage:

  if(af==INET6)
  {
      log("the SIP message was received over IPv6\n");
  };

This keyword can be used to test the value of 'proto' and check whether the SIP packet was received over TCP or not.

Example of usage:

  if(proto==TCP)
  {
      log("the SIP message was received over TCP\n");
  };

This keyword can be used to test the value of 'proto' and check whether the SIP packet was received over UDP or not.

Example of usage:

  if(proto==UDP)
  {
      log("the SIP message was received over UDP\n");
  };

This keyword is set to the maximum size of an UDP packet. It can be used to test message's size.

Example of usage:

    if(msg:len>max_len)
    {
        sl_send_reply("413", "message too large to be forwarded over UDP without fragmentation");
        exit;
    }

It is a reference to the list of local IP addresses, hostnames and aliases that has been set in SIP-Router configuration file. This lists contain the domains served by SIP-Router.

The variable can be used to test if the host part of an URI is in the list. The usefulness of this test is to select the messages that has to be processed locally or has to be forwarded to another server.

See "alias" to add hostnames,IP addresses and aliases to the list.

Example of usage:

    if(uri==myself) {
        log("the request is for local processing\n");
    };

Can be used in assignment to reset the value of a per-script variable or to delete an avp.

Example of usage:

    $avp(i:12) = null;
    $var(x) = null;